Noble V1D Vortex Generator Subaru WRX 22-24 – Paint Matched Noble Performance

Noble V1D Vortex Generator (Black or Paint Matched)

Fitment Information:

2022-24 Subaru WRX

Features:

• Aggressive styling
• Mounts to rear portion of roof
• 3M provided for an easy installation
• Matte Black, Gloss Black, or Paint Matched Options

This easy to install modification helps your vehicle stick out just a bit more. Ours is more aggressive and covers a larger portion of the roof versus the OEM Subaru vortex generator.

It was a preferred design for the VA chassis and now it’s available for all VB owners.

Installation

Prep the application area and make sure it is free from dust, debris, wax, etc.

The 3M requires installation temperatures of 70-80 degrees. It has a solid bond after 24 hours and will achieve full bond after 72 hours.

Use another person to test fit the vortex generator prior to starting the actual install. Note the proper position.

Apply adhesive primer to the vortex generator and the painted surface that will make contact with the adhesive on the Vortex generator.

Now apply 3M to the vortex generator (on top of the primer you just used) and remove the ends of the 3M backing tape. Expose enough so that you can pull it out from under the vortex generator once you put it back on.

Reposition the vortex generator in the correct position and remove all of the 3M backing tape. Press down firmly in all areas for 15 seconds.

Wait 30 minutes for initial bond to be made and then press down firmly again. Check for any spots that may not be making contact with both the roof and vortex generator.

Note: The Roof Spoiler is sold separately.