Noble STI Style Mod 1 High Back Paint Matched Duckbill Spoiler Subaru WRX 22-24 Noble Performance

Noble STI Style Mod 1 High Back Paint Matched Rear Spoiler

Fitment Information:

2022-2024 Subaru WRX

Features:

Noble has taken a great OE style and changed it slightly. There’s no dip in the center of this spoiler. It follows a more traditional duck bill style. Also, there’s no ordering and finding a reputable paint shop to get your new part ready. Just order from us and it will arrive ready to install.

While the factory only offered one color, we offer them all for a unique look.

NOTE: Factory STI spoiler has different bolt holes vs the stock spoiler that comes with most WRXs. Pre-inserted nuts are only used so the manufacturer can paint the item. Hardware supplied allows for drilling into the spoiler through the pre-existing holes that most WRXs already have.

Installation

Prep the application area and make sure it is free from dust, debris, wax, and has not been freshly ceramic coated (unless you intend to use the mechanical fasteners). This spoiler can be installed with a combination of 3M adhesive and/or the mechanical fasteners.

The 3M requires installation temperatures of 70-80 degrees. It has a solid bond after 24 hours and will achieve full bond after 72 hours.

Use another person to test fit the spoiler prior to starting the actual install. Note the proper position. Apply 3M to the spoiler and remove the ends of the 3M backing tape. Expose enough so that you can pull it out from under the wing once you put it back on.

Apply the promoter prior to final install. Reposition the spoiler in the correct position and remove all of the 3M backing tape. Press down firmly.

NOTE: Use of screws is only meant to be in ADDITION to 3M. If using screws, be sure to only tighten them by hand as you are drilling through the plastic spoiler.