Part #: STF-DOOR-WRX
Are you tired of getting scratches from your nails behind your door handle? These clear overlays protect your vehicle’s paint and keeps it looking new. It is resilient against light scratching.
INSTRUCTIONS
Please follow these guidelines for the best results.
Clean the painted surface behind the door handles. It is good to have a hair dryer or heat gun around during install. LIGHT heat can help you shape the product and dry out the soapy water.
We suggest you use a slightly soapy mixture of water on the back side of the vinyl so you can move it around initially. Not too much though. The more you wet it, the more heat you will have to use to dry up the soapy water.
The top of the cut out is labeled on the back side. This item has relief cuts in the center to make installation easy. You will want to align this area horizontally behind the door handle. Once this is pushed flat against the paint (use your fingers), you can start at point B1 or B2. Push down in the center and then push the material to the left. Extra material should overlay in the area of the relief cuts. Then complete the top or bottom by pushing the material out from the center to the right. If you started with B1, do the same to B2 and vice versa.
The DIY install will leave you proud of the work you’ve done. A great conversation piece as others will probably want to know how you did it all.